Out of stock!
Enter your email to be informed when this product arrives:


Send Close
Out of stock!
Enter your email to be informed when this product arrives:
Send Close
Mike Gay 22 3.0 Front Wing Mount

Mike Gay 22 3.0 Front Wing Mount

Product Code:MJG1002
Availability:1
Price: $15.00
Qty:     - OR -   Add to Wish List Add to Compare

Developed and 3-D Printed by Mike Gay, his own personal creation that places the 22 3.0 front wing in "clean air" on the front of the car with a rigid mount.  

  • Mounts wing rigid to the front bulkhead, lower on the car in "clean air" to get the most effect from the wing.
  • Requires 4 x 2mm spacers to fit inside molded front tower
  • Fits JConcepts and Pro-Line front wings (trim off tower mounts).
  • Mount wing with M3 x 4 to 6mm length Button Head Screws (stainless steel screws now included)
  • All screws included, needs 2mm spacers.

Coach Wenger's Pro-Tip:   The wing mounted lower in front of the tower tends to give the benefit of the front wing, but is less aggressive and easier to drive than the wing mounted up and behind the tower.  In short, for more steering run the wing high, for smoother steering run it down low.

The front wing is not new to R/C and has been tried on several generations of cars dating back to the 80s and 90s.  The front wing tends to smooth out the steering feel, and keeps the front end down middle to exit in turns.   It is especially helpful when jumping directly into a turn.